7.4.2.5 Properties Tab: Includes the information associated with the vessel that
was entered when the vessel was schedule. Some vessel Properties can be
edited. These include the vessel Label, Cell Types and Passage number. New
Notes can be added, but previously added Notes cannot be edited. To edit
properties, enter the new information and press the “Update” button at the
bottom of the window.
7.4.2.6 Graph Export Tab: Displays metrics regarding image acquisition. No assay
metrics will be available until an analysis job is complete.
7.5 Data Processing
Data processing analyzes and summarizes qualitative images into quantitative data. The
IncuCyte™ ZOOM software separates data processing into two distinct modes, the Assay
Development Phase, and the Established Assay Phase. Data Processing Technical Notes are
available on our website http://www.essenbioscience.com/supportdocs for the special modules
listed below:
Angiogenesis Data Processing Technical Note
Confluence Data Processing Technical Note
Object Count Data Processing Technical Note
NeuroTrack™ Data Processing Technical Note
Scratch Wound Data Processing Technical Note
Please refer to these documents for a detailed outline on how to process images using the
Analysis Job Utilities. Below is a brief overview of the data processing modes and the Analysis Job
Utilities used in the IncuCyte™ ZOOM software.
7.5.1 Assay Mode vs. Established Mode
As described in the figure below, we separate the data processing flow into two distinct
phases.
To Next Page
Loading...