1. Add a New Vessel into the Scheduler (refer to section 7.3).
2. Under the Analysis Job Setup heading, select the Analysis Job type (Basic
Analyzer, Angiogenesis, or NeuroTrack) by using the Job Type drop down
menu.
3. Under the same heading, select the “Processing Definition” by using the
drop down menu or the “Search” button. Refer to Table 5. Analysis Job
Rules for Analysis Jobs that are available at time of scheduling.
4. Data will be processed following each scan to provide analysis in real-
time.
Table 5. Analysis Job Rules
Analysis Rules for Established Mode
Processing Definitions will only be available if the IncuCyte™ ZOOM is using the
same objective that the Processing Definition was developed with, and if the vessel
being scheduled contains channels that match the Processing Definition.
Channel(s) Selected during Vessel Scheduling
Processing Definitions Available
(Basic Analyzer as example)
7.5.2.4 Edit Processing Definition
Once a Processing Definition is created, the User may edit values within the
Parameters, Clean-up, and Filter settings.
To Next Page
Loading...