down menu. The movie options will still be available in this
menu, but if you try to export single images as a movie, you will
get an error message.
Choose Image Type
Enter the desired name into the Name Prefix box. The prefix will
be automatically assigned additional time and area information
that will appear in the Example box below.
Select “Export”. The “Export” button will display the total
number of images (files) to be exported.
3. Time Range Image Export: Time Range Image Export is similar to Single
Time Image Export, and a review of the Single Image export instructions
will be useful.
Select Time Range instead of Single Time in the drop-down menu
adjacent to the Time Tree.
Use the mouse or the arrow buttons to select the scan times for
export. All images including and between the selected times will
be exported.
NOTE: It is NOT possible to select non-consecutive times for
export.
Select the desired wells/sectors and images.
Use the Browse button to choose the destination file.
Choose Sequence Type: Set of Individual Images.
Select the desired Image Type.
Enter a Name Prefix.
Click the “Export” button.
7.7.1.3 Export Image Set (Multiple Images) with Customization
Following the same setup guidelines discussed in the previous section [Export
Image Set (Multiple Images)], it is possible to customize the set of exported
images by customizing the image cropping and scaling and/or adding legend
and timestamp information to each image. To accomplish this, the Sequence
Type must be set to “Image set with customization.” Once this Sequence
Type is selected, click on “Image Designer (Crop, Scale, Legend, etc)…” above
the “Export” button at the bottom right of the “Movie/Image Set Export”
window. A new window appears that is virtually identical to the Export
Designer. As discussed in that section, the designer is used to interactively
crop and scale the image and to add a legend or timestamp to each image if
desired. There is an important preview tool found in the Export Designer, and
we strongly recommend that the designer and previewer be used prior to
launching a full image-set export with customization.
To Next Page
Loading...