Essilor Instruments AKR 300 User Manual

[Touch] button (button by monitor & touch screen)
1. [K/R] mode
Press this button in order to change measurement mode.
2
. [Manual]
Press this button in order to start manual or automatic measurement.
3
. [LiveREF]
Press
this button
when the examinee's eye is difficult to measure due to cataract or examinee with
intraocular lens.
4
. [Print]
Press this button in order to print or transfer the measurement.
5
. [Func]
Press this button in order to change function mode.
6
. [Display]
Press this button
in order to enter [Display] mode, where you can see measurement data stored in
memory.
7
. Press this button to clear all stored data in memory.
8
. [Setup]
Press this button
in order to enter [Setup] mode, where you change all the settings about measurements,
printouts, etc.
9
. [CYL]
Press this button in order to change [CYL] form.
10
. [Size]
P
ress this button in order to enter [Size] mode, where you can measure the diameter of cornea, etc.
11
. [Illum]
Press this
button
in order to enter [RET] (Retroillumination) mode, where you can observe the image
obtained by retroillumination.
USER MANUAL > DESCRIPTION
AKR300 - Auto Kerato Refractometer > V3 - 04-2020
16

Essilor Instruments AKR 300 Specifications

General

Brand	Essilor Instruments
Model	AKR 300
Category	Measuring Instruments
Language	English