ETAS ES4440.2 - Cables; Ethernet Cable (RJ-45 Connector - Lemo Connector); Power Cable

ES4440.2 Compact Failure Simulation Module - User’s Guide 47
ETAS Accessories
4.3 Cables
4.3.1 Ethernet Cable (RJ-45 Connector – Lemo Connector)
This cable is used to connect an ES600 Network Module to the host.
Fig. 4-2 CBE100-x Cable
4.3.2 Power Cable
This cable is required for the power supply of an ES600 Network Module.
Fig. 4-3 CBE120-2 Cable
Note
Only ETAS cables can be used at the ES600 interfaces. The maximum permissi-
ble cable lengths must be adhered to.
Side A Side B
Connectors Length Short Name Order Number
RJ-45 connector – Lemo
connector
3 m CBE100-3 F-00K-102-559
8 m CBE100-8 F-00K-102-571
20 m CBE100-20 F-00K-102-570
Side A Side B
Connectors Length Short Name Order Number
Banana connector – Lemo
connector
2 m CBP120-2 F-00K-102-584