ES4440.2 Compact Failure Simulation Module - User’s Guide 5
ETAS Introduction
1 Introduction
This User’s Guide contains a description of the ES4440.2 Compact Failure Simu-
lation Module.
It consists of the following chapters:
• Introduction
This chapter
• "Hardware Features" on page 19
This chapter contains a detailed description of the features of the
ES4440.2 Compact Failure Simulation Module.
• "Pin Assignment" on page 31
This chapter contains a description and assignment of all connectors on
the front panel and on the rear of the housing.
• "Technical Data" on page 49
This contains details of the technical data of the ES4440.2 Compact Fail-
ure Simulation Module.
1.1 Basic Safety Instructions
Please adhere to the safety instructions in this manuals to avoid injury to yourself
and others as well as damage to the device.
1.1.1 Identification of Safety Information
The safety instructions contained in this manual are identified by the general
danger symbol shown below:
The safety instructions shown below are used for this purpose. They provide
notes about extremely important information. Please read this information very
carefully.
Identifies an immediate danger with high risk, which could result in
death or severe bodily injury if it is not avoided.
Identifies a possible danger with medium risk, which could result in
death or (severe) bodily injury if it is not avoided.
Identifies a danger with low risk that could result in slight or moder-
ate bodily injuries or property damage if it is not avoided.
To Next Page
Loading...