ETAS ES4440.2 - LOAD CH0-CH42; LOAD CH43-CH63 Connector

ES4440.2 Compact Failure Simulation Module - User’s Guide40
Pin Assignment ETAS
3.9 ”LOAD CH0-CH42” / ”LOAD CH43-CH63” Connector
The 64 high-current channels of the ECU are connected to the loads via these
two connectors.
Type: ITT Cannon CA02COM-E28A51S-B-01 (female)
Counterpart: ITT Cannon CA06COM-E28A51P-B-01 (male)
Fig. 3-8 ”LOAD CH0-CH42” and ”LOAD CH43-CH63” Pin Assignments
Pin Signal Internally Connected to Connector
”ECU CH0-CH42” - Pin:
ALOAD0ECU0
B LOAD1 ECU1
CLOAD2ECU2
D LOAD3 ECU3
ELOAD4ECU4
F LOAD5 ECU5
GLOAD6ECU6
H LOAD7 ECU7
JLOAD8ECU8
K LOAD9 ECU9
L LOAD10 ECU10
M LOAD11 ECU11
N LOAD12 ECU12
P LOAD13 ECU13
R LOAD14 ECU14
S LOAD15 ECU15
T LOAD16 ECU16
Tab. 3-9 ”LOAD CH0-CH42” Pin Assignment
B ACDE
T R PU S N M
b Z Yc a W V
j
g
fk h e d
r n ms p l
u tvw
y
L K J H G F