Need help?Do you have a question about the ETC P-ACP and is the answer not in the manual?
General| Enclosure Rating | IP20 |
|---|---|
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% non-condensing |
| Communication Protocol | ETC Net2, sACN |
Step-by-step physical installation of ACP module into enclosure, with safety warnings.
Outlines options for DRd setup: dimmer types, properties, patching, emergency operation.
Enables setting specific dimmer levels or ranges, selecting dimmers individually or by group.
Allows status display, activation, deactivation, recording, and fade timing for presets.
Displays/changes architectural channel attribute levels, control arbitration, DMX/sACN addresses.
Saves architectural and dimming configs (.pcf, .drd) to media for DRd enclosures.
Saves dimming config file to media for DRd enclosures, defaulting to current name.
Displays calendar of timed events for selection, allowing editing of date, times, actions, recurrence.
Guides creating new timed events: date, times, actions, recurrence, similar to editing.
Provides step-by-step ACP replacement, including saving configs, removing old, installing new.
To Next Page
