ETC P-ACP User Manual

7 Paradigm Architectural Control Processor Configuration Manual
Installation Environment Requirements
The Paradigm ACP is designed for use in a Unison DRd or ERn enclosure. The
environmental conditions for the Paradigm ACP should adhere to the requirements set for
the host enclosure. Reference the related enclosure Installation manual for complete
details.
• A clean (not dusty), temperature controlled environment with the following conditions:
• ambient temperature 32-104°F / 0-40°C
• ambient Humidity 30-90%, non-condensing
Installation is as simple as sliding the ACP module into the guided slots of the enclosure.
There are no wire terminations made directly to the Paradigm ACP, instead all wire
terminations are made to the host enclosure left and right I/O boards. Reference the related
DRd or ERn enclosure installation manual for termination details.
CAUTION:
HVAC systems must at all times maintain the specified ambient temperature at the
Unison enclosure.

ETC P-ACP Specifications

General

Brand	ETC
Model	P-ACP
Category	Controller
Language	English