Need help?Do you have a question about the Euphonix MC Transport and is the answer not in the manual?
General| Brand | Euphonix |
|---|---|
| Model | MC Transport |
| Category | Controller |
| Language | English |
Information on FCC compliance and safety guidelines for the device.
Manufacturer's declaration of compliance with FCC rules and operating conditions.
Details compliance statements for Canada, European Union, Australia, and Japan.
Crucial safety precautions and warnings for operating the MC Transport device.
Explains features of the PDF manual like bookmarks, links, and search functionality.
Instructions for unboxing and positioning the MC Transport using its built-in legs or riser brackets.
Steps for installing the EuControl software and connecting the MC Transport to a computer.
Solutions for common problems encountered during the MC Transport setup process.
Procedure for updating the MC Transport's firmware via the EuControl software.
Identifies and describes the main physical controls on the MC Transport device.
Instructions for using the POWER key to turn the MC Transport on and off.
How to use the Show key to view current function assignments for other keys.
How to lock the Show key for easier browsing of key assignments.
Details on the six Soft Keys, their dual functions with Shift, and LED indicators.
Explains the Transport Keys, their dual functions with Shift, and LED color meanings.
How to use the Numeric Keypad for data entry and its programmable functions.
Explains the differential operation of Jog Wheel and Shuttle Ring for parameter control.
Details typical uses of the Jog Wheel, including timeline, zoom, and as an Assignable Knob.
Describes the Shuttle Ring's primary use for timeline scrubbing and its assignable functions.
How to switch between applications or workstations using the dedicated key.
Explains how the Shift key accesses secondary functions for other keys.
Method to lock the Shift key for accessing alternate functions without holding it down.
Explains the Surfaces tab for connecting and managing Artist media controllers in EuControl.
Details on adding, removing, and automatically managing connected surfaces in EuControl.
Procedure for updating the firmware of connected Artist media controllers via EuControl.
How to view hardware and software details of connected controllers using Show Info.
Configuration of the Workstations tab for controlling applications on other computers.
Steps to add, detach, and redirect keyboard/mouse control to workstations.
Controls general behavior like track knob sets, plug-in handling, and solo mode.
How to adjust the sensitivity of the Jog Wheel and Shuttle Ring.
Configuration for display screen dim time and other preferences.
Setting the idle time before the MC Transport's display screen dims.
Manages how application tracks are assigned to controller strips.
How to keep transport controls or the entire surface locked to a specific application.
Mentions Layouts (MC Mix/Control only) and introduces Soft Keys configuration.
How to edit assignments in EuControl, focusing on the in-focus application.
Explains how to save, revert, or restore Soft Key assignments.
Choosing which set of keys (Numpad, Soft Key, Wheel) to configure.
How to assign functions to keys when the Shift key is pressed.
Setting labels, layouts, icons, fonts, and colors for Soft Keys.
How to remove a function assignment from a Soft Key.
Accessing the command editor to add or delete commands for Soft Keys.
Selecting command types (Key, EuCon, Wheel) to assign to Soft Keys.
Configuring how commands repeat when a Soft Key is held down.
Overview of different command types available for Soft Keys.
How to create commands using keystrokes and modifiers.
Steps to create commands using EuCon protocols, using 'Record' as an example.
Assigning custom functions to the Jog Wheel and Shuttle Ring via Wheel Commands.
Step-by-step guide to programming the Jog Wheel for custom arrow key input.
Process of assigning a custom wheel command to a Soft Key in the dialog.
How to configure the Jog Wheel to act as an Assignable Knob for controlling parameters.
Detailed steps for assigning the Assignable Knob function to a Soft Key.
Explains the default DHCP IP assignment and how to switch to a static IP address.
Steps to input and set the IP address fields using the Jog Wheel and keypad.
Procedure for setting the Subnet Mask for network configuration.
To Next Page