Eurapo Prisma PV - PAS - Air Suction Plenum with Spigots; PA90 - 90° Air Suction Plenum; RCA - Duct Connection

33
EN
1
2
3
4
5
6
7
8
9
10
SIZE 110 112 114 216 218 220 222 224 226 328
No. of spigots 2 2 3 4 4 3 3 4 4 4
Spigots’ external Ø mm 100 150 150 150 150 200 200 200 200 200
A mm 351 476 601 726 851 976 976 1226 1226 1476
B mm 191 191 191 191 191 221 221 221 221 221
C mm 176 176 176 176 176 206 206 206 206 206
D mm 76,8 101,8 101,8 101,8 101,8 116,8 116, 8 126,8 126,8 126,8
E mm - - - 174 222,5 - - 360 360 485
F mm 197 272 198,5 174 202 371 371 252 252 252
SIZE 110 112 114 216 218 220 222 224 226 328
A mm 351 476 601 726 851 976 976 1226 1226 1476
B mm 176 176 176 176 176 206 206 206 206 206
C mm 176 176 176 176 176 206 206 206 206 206
SIZE 110 112 114 216 218 220 222 224 226 328
A mm 351 476 601 726 851 976 976 1226 1226 1476
B mm 176 176 176 176 176 206 206 206 206 206
7.13 PAS – AIR SUCTION PLENUM WITH SPIGOTS
Air suction plenum made of galvanized steel sheet, provided with collars
(spigots) for the connection to the external air intake. It is mounted on
the air intake of the unit, between the external air intake and the filter,
which remains accessible for maintenance.
7.14 PA90 – 90° AIR SUCTION PLENUM
The 90° air suction plenum is made of galvanized steel sheet, provided
with a rectangular collar for the connection to the external air intake. It is
mounted on the air intake of the unit, between the external air intake and
the filter, which remains accessible for maintenance.
7.15 RCA – DUCT CONNECTION
This duct connection is made of galvanized steel, provided with a
rectangular collar for the connection to the suction air duct. It is mounted
on the air intake of the unit, between the duct and the filter, which
remains accessible for maintenance.