Europlex 3GS - Controller Cabinet

Passing and Voiding Cards
3GS User Guide
31
User Guide
Change Requirement
This option allows you to decide if a card should also require a PIN code before it will grant access through a
door. It also allows you to change the existing PIN code for the card or create a new one.
✍ The user should be aware that the PIN code created using this option will apply to all the
cards being passed at this stage
Once a PIN code requirement has been assigned, you will be prompted to identify the card location.
Change Card Location?
When passing the card, you must establish where the card actually is at the time of passing. The Roll Call
and Anti-Passback functions allow the installer to identify which cards are in use in the system at any given
time, and to control the use of cards within the system. This menu will identify the card as being inside or
outside the alarm area when passed. When all the system cards can be located at any time, they can be
tracked and controlled effectively. When you have assigned the card a location status, press the key to
return to the main menu.
Voiding Cards
The Void Cards option is used when you have a set of cards that you want to be
removed from the system.
Voiding a card removes all the card’s settings from the system, from system ID to
access/function/visitor levels.
Exiting the Setup Cards menu
Press to exit the Setup Cards menu.
The display will show:
If you have a printer connected to the controller serial port, you can now print
out the card settings you have just configured.
Press to print and to exit the menu.
Change PIN requirement?
PIN code not required
PIN Code required: YES
Yes/No
Change PIN Code ?
Not Assigned
Current PIN code:
****
New PIN code:
YES
NO
NO
YES
#
#
#
/
Change Card Location?
Card inside perimeter
Card inside perimeter YES
(Yes/No)
YES
NO
#
#
/
NO
Key in the first card number in
the range, and press
Key in the last card number in
the range,
and press
:
FROM CARD NO 1
TO CARD NO 15
#
#
To void a single card, enter a
range of, say, 2 to 2
YES
VOID CARDS ?
YES
PASS CARDS ?
HALF
HELP
UNSET
CARDS OPTIONS PASS/VOID
Unset .. Half .. Help
SET UP CARDS