NexLog Recorder User Manual v2.2.0 137
The media with id <~110~> in the <~111~> archive
drive of recorder <~1~> is full
Warning: the operation of <~110~> was performed
when the drive was in a bad state. Please retry
the operation
System configuration saved to the <~110~> archive
drive
System configuration was NOT saved to the <~110~>
archive drive: <~111~>
System Logs have been successfully saved to the
<~110~> archive drive
System Logs were NOT saved to the <~110~> archive
drive: <~111~>
System configuration was loaded from the <~110~>
archive drive. Please shutdown and reboot your
system. Serial number and License information is
not restored on a configuration restore and needs
to be entered manually
System configuration was NOT loaded from the
<~110~> archive drive because of the error:
<~111~>
Writing archive to the <~110~> archive drive
failed. Please dismiss this message by hitting the
'OK' soft key, insert new media into the <~110~>
archive drive and then hit the 'resume' soft key
to retry.
The current archive time has been changed on the
recorder from <~110~> to <~111~>.
<~110~> archive drive action: <~111~>.
Call Meta Information saved to the <~110~> archive
drive
Call Meta Information was NOT saved to the <~110~>
archive drive: <~111~>
Call Meta Information was loaded from the <~110~>
archive drive.
Call Meta Information was NOT loaded from the
<~110~> archive drive because of the error:
<~111~>