EVERFOCUS ELECTRONICS CORPORATION
change this option to yes.
you if you want to do a sy
This will bring up a second dialog which asks
stem update again. Use the arrow buttons to
select yes and press the enter button.
Please Note: See System Update Chapter for more details and
diagrams. Also after the system has updated successfully, be sure to
cycle the power to the digital recorder by turning the power off and
then back on.
¾ Load Default: This entry is to set the DVR back to factory settings. Please
remember if you are having difficulties with your DVR we suggest
restoring the defaults before calling Tech support. Initially Load defaults is
set to No. To Load the defaults simply use the arrow buttons to change
this option to yes. This will bring up a second dialog which asks you if you
want to do a load defaults again. Use the arrow buttons to select yes and
press the enter button.
Please Note: See Load Defaults Chapter for more details and
diagrams. Also after the system has loaded the defaults successfully, be
sure to cycle the power to the digital recorder by turning the power off
and then back on.
¾ Password Enable: This fi the password function on or off.
rrow keys to make your
¾
A to Z, and /( ) . - * & @ : ”
eld is to turn
The default is set to No. If you would like to enable the password change
this option to yes. To change this, simply use the arrow keys on the DVR
which also represent the CH1, CH2, CH3 and CH4 keys (These are the
top four left buttons). Use the up and down a
selection.
Password: This field is the password for the system when the password is
enabled. The password supports up to 6 characters. The available
alphanumeric characters are:
0 to 9,
To change this, simply use the arrow keys on the DVR which also
represent the CH1, CH2, CH3 and CH4 keys (These are the top four left
buttons). Use the up and down arrow keys to make your selection.
: Press or to move the cursor to the left or right.
: Press or to change the value.
These keys are located at the top left row of keys (same keys
as channel 1-4).
To Next Page
Loading...
