EVERFOCUS ELECTRONICS CORPORATION
Transmission Setting
There are 6 different speeds that can be used to transmit inst
information through the RS232/RS485 port on the device, 1
baud, 4800 baud, 9600 baud, 19200 baud, and 3840 baud. Th
/RS485 Setting Menu on
Remote Co
A computer can be used to control the DVR by sending the packet as follows.
ruction or
200 baud, 2400
e default setting
from the factory is 9600 baud. Please refer to RS232
page 32 for details.
ntrol Protocol
To Next Page
