EVERFOCUS ELECTRONICS CORPORATION
¾ The next step is to open ports within your router. Go to Virt
the router.
ual Server in
Example1:
Protocol Type -
The protocol used for the virtual service.
Public Port -
The port number on the WAN (Wide Area Network) side that will be
used to access the virtual service.
Private Port -
The port number of the service used by the Private IP computer.
Schedule - The schedule of time when the virtual service will be enabled.
The schedule may be set to Always, which will allow the particular service to
always be enabled. If it is set to Time, select the time frame for the service to
be enabled. If the system time is outside of the scheduled time, the service will
be disabled.
Virtual Server -
Select Enabled or Disabled
To Next Page
