Everlast EV200 - TROUBLESHOOTING

Customer Service 1-888-707-1880
Or email customerservice@dyaco.ca 21 Dyaco Canada Inc.©2021
TROUBLESHOOTING
Problem Cause Solution
Monitor does not display
Battery not Installed Install battery
Sensor wire not connected
Ensure the sensor wire is connected
properly to the computer
No speed or count displays
on
the monitor
Sensor wire not connected
Ensure the sensor wire is connected
properly to the computer
Sensor wire not working properly Replace sensor wire
Monitor not working properly Replace monitor
No tension
Magnetic assembly not working
properly
Replace magnetic wheel assembly
Tension knob defective Replace the tension knob
Tension needs Adjustment
Turn tension adjustment knob
accordingly
Grinding Noise
Idler pulley defective Replace idler pulley
Flywheel defective Replace flywheel
Squealing V-belt slipping Adjust v-belt