7700FR/7800FR MultiFrame
7800TR-32x24 Modular Tally Router
Revision 1.2 Page - 3
2 SPECIFICATIONS
2.1 REAR GENERAL PURPOSE INPUTS
Number of GPIs: 24
Connectors: 2 x D-Subminiature DC-62 female sockets, each with 12 GPI
Maximum Voltage: +/- 24 Volts DC
Protection: Current limit, approximately 10mA – 15mA.
Wet Power: Provided on +WET and –WET pins (isolated from chassis ground)
Timing: GPI trigger to “.UV” Quartz protocol Ethernet packet transmission:
2ms – 30ms
2.2 REAR GENERAL PURPOSE OUTPUTS
Number of GPIs: 32
Connectors: 2 x D-Subminiature DC-62 female sockets, each with 16 GPO
Maximum Voltage: +/- 24 Volts DC
Protection: Polyfuse, 0.15 Amps maximum
Wet Power: Provided on +WET and –WET pins (isolated from chassis ground)
Timing: GPO relay closure upon receipt of “.SA” Quartz protocol command:
< 2ms
2.3 ETHERNET PORT
Network Type: Gigabit Ethernet 1000Base-T IEEE 802.3z
Connector: RJ-45
SNMP Standard: SNMP v1 compliant (RFC-1157, RFC-1213)
2.4 ELECTRICAL
Voltage: + 12V DC
Power Consumption
Wet Power Off: 10 watts typical (Wet power not being used)
Wet Power On: 50 watts max (internal 5V or 12V power being used)
EMI/RFI: Complies with FCC regulations for class A devices.
Complies with EU EMC directive.
2.5 PHYSICAL
Number of Slots: 2
Enclosures:
7700FR-C: 200W 3RU Multiframe – holds up to 15 single slot modules.
7800FR(-QT): 360W 3RU Multiframe with genlock – holds up to 15 single slot modules.
350FR: 160W 3RU Portable Multiframe – holds up to 7 single slot modules.
7801FR: 100W 1RU Multiframe – holds up to 4 single slot modules.
Operating Temperature: 0ºC to +40ºC (32ºF to 104ºF) ambient
To Next Page
Loading...