261
MIDSECTION
TILLER HANDLE SERVICE – LONG HANDLE
12
Remove locknuts from screws on top of steering
arm.
Remove the screws attaching tiller bracket to
steering arm. Remove tiller bracket and handle.
Disassembly
Loosen throttle friction control so there is no
restriction on grip.
IMPORTANT: Do not back screw out com-
pletely. Nut is under spring tension.
Remove seven screws and bottom cover of tiller
handle.
Remove stop switch cover screws, unplug stop
switch electrical connector and remove stop
switch assembly.
1. Screw 006362
1. Screw 006361
1
1
1. Throttle friction control 006711
1. Cover screw 006566
006713
1
1
To Next Page
Loading...
