Evolis badgy 100 User Manual

11
Removing printed cards
Once the print cycle is complete, the cards are issued into the output hopper below the card feeder. This output hopper is designed to collect the printed cards. The printer is
equipped with an output hopper with a maximum capacity of 25 cards that are 0.76 mm thick and 40 cards that are 0.50 mm thick.
Using cards that are 0.76 mm thick after extended use of cards that are 0.50 mm thick may require the rollers to be cleaned. See section 3-1a
Cleaning the Printer.

Evolis badgy 100 Specifications

General

Brand	Evolis
Model	badgy 100
Category	Printer
Language	English