To Next Page

To Previous Page

4-2b Printing a Graphic Test Card

The graphic test card is used to check the print quality in color or monochrome, the absence of any offsets, and whether the ribbon is synchronized correctly.

To print the graphic test card, check ﬁrst of all that a ribbon and card are present in the printer.

Go to the Badgy Print Center, select System details, and click on the Testing cards tab. Then click on the Graphical test card button. The card is printed and the printed card is

ejected into the output hopper.

Printing the graphic test card can only be launched from the Badgy Print Center. To do this, open the Badgy Print Center, double-click on your

printer or right-click on "Properties" and go to "System details" then "Testing cards."

4-2c Identifying Installed Software Versions

You can directly identify the system versions installed (driver, setup, etc.):

From the Badgy Print Center, double-click on the printer name to access its Properties.

Click on System details , then System details.