3-2 Routine printer cleaning
3-2a ROUTINE PRINTER CLEANING
The print head warranty is directly linked to routine cleaning of your printer.
If you do not carry out this cleaning at the required times, the print head warranty will cease to be valid.
Recommended cleaning cycle: whenever the ribbon is changed
Mandatory cleaning cycle: when the cleaning warning is triggered
Servicing accessory: adhesive cleaning card.
Your printer is tted with a cleaning warning system which is triggered after a certain number of cards have
been inserted.
You should proceed with the routine cleaning of your printer as soon as the warning is triggered.
If you continue to run the printer despite the warning and if the warning light remains lit, the print head warranty
will be automatically voided owing to a failure to comply with your contractual maintenance obligations.
Printer
Cleaning required after:
(warning light ashing)
Number of cards remaining
before warranty voided
(warning light steady)
Warranty invalid after:
(warning light steady)
Zenius 1000 cards 200 cards 1200 cards
21
3
To Next Page
Loading...
Need help?
General
Weight and Dimensions
