C1b - CONTACT SMARTCARD ENCODING
A printer tted with a smartcard contact station works in exactly the same way as a basic card printer. The Evolis smartcard contact
station is used to program chips to ISO 7816-2 standards.
ä
Contact station location
The contact station is a module installed either in the factory or on site by your Evolis dealer. It is located over the path taken by the cards
and after the print head. To contact the smartcard, the contact station descends mechanically against the smartcard. The programming
sequence for a chip is always carried out before the card is printed.
Use only smartcards compliant with the ISO 7816-2 standard.
Never print over the chip.
56
C
To Next Page
Loading...
