3-3 Advanced cleaning
For a more in-depth clean, we recommend carrying out an advanced clean every ve routine cleaning cycles.
Evolis provides an Evolis High Trust
®
maintenance kit consisting of 2 adhesive cards, 2 impregnated "T" shaped cards, a cleaning pen and a
box of 60 wipes. The "T" shaped card is used to clean the card feed rollers and the magnetic encoder head. To ensure advanced cleaning
is carried out properly, the procedure given below must be followed.
3-3a ROUTINE PRINTER CLEANING
Recommended cleaning cycle: every 5 routine cleaning cycles.
Servicing accessory: impregnated "T" shaped card and adhesive card
Follow the procedure below:
Ê
Open the printer cover.
Ë
Sing the lever, set the card thickness to the MAX position.
Ì
Remove the ribbon as shown on the diagram.
Í
Close the cover and check it has clicked shut.
26
Ê ÌË Í
3
To Next Page
Loading...
