Evolis Zenius - Appendix A: Technical Specifications; General Technical Features; Printing Speed Specifications; Card Management and Data

Appendix A
A1 - Technical specications
This section presents your printer’s technical printing properties.
ä
General technical features
n Single side print module, edge-to-edge printing
n Colour sublimation and monochrome thermal transfer
n 300 dpi print head (11.8 dots/mm)
n 2 million colours
n 16MB RAM
ä
Printing speed
Full card print
n YMCKO 120 cards/hour
n Monochrome 400 cards/hour
Maximum speed (under special conditions)
n Colour up to 150 cards/hour
n Monochrome up to 500 cards/hour
ä
Card management and technical data
n Automatic or manual feeder
n Feeder capacity: 50 cards (0.76 mm – 30 mil)
n Output hopper capacity: 20 cards (0.76 mm – 30 mil)
n Card thickness: 0.25 to 0.76mm (10 to 30 mil), adjustment using the gauge
n Card types: PVC and composite PVC cards, PET, ABS
1
and special clear overlaid cards
1
n Card format: ISO CR80 - ISO 7810 (53,98 mm x 85,60 mm)
1
Under specic conditions
47
A