Evolve BAMBOO GTR - Page 41

/41
7. With ‘Set Brake Min’ highlighted, release the BRAKE LEVER
entirely and press the ON/OFF BUTTON once to set the
value.
8. With ‘Set Brake Max’ highlighted, press and hold the BRAKE
LEVER all the way in. Press the ON/OFF BUTTON once to
set this value. Once the ON/OFF BUTTON is pressed the
BRAKE LEVER can be released.
9. With ‘return’ highlighted, press the ON/OFF BUTTON once
to exit the trigger screen. Turn the remote off by holding the
power button for 1 – 2 seconds.
The remote trigger limits have now been set.
ON / OFF ON / OFF
ON / OFF
ON / OFF
x1 x1
x1
x1
Acc Trigger: XXXX
Brake Trigger:XXXX
Throttle: X
Set Acc Min: XXXX
Set Acc Max: XXXX
Set Brake Min: XXXX
Set Brake Max: XXXX
return
Acc Trigger: XXXX
Brake Trigger:XXXX
Throttle: X
Set Acc Min: XXXX
Set Acc Max: XXXX
Set Brake Min: XXXX
Set Brake Max: XXXX
return
Acc Trigger: XXXX
Brake Trigger:XXXX
Throttle: X
Set Acc Min: XXXX
Set Acc Max: XXXX
Set Brake Min: XXXX
Set Brake Max: XXXX
return
A
A
A
B
B
B
C
C
C
PUSH &
HOLD