EVS XT-3 - 2. Safety and Compliance; 2.1. Safety; 2.2. EMC Standards

2. Safety and Compliance
2.1. Safety
This equipment has been designed and tested to meet the requirements of the following:
• EN 60950 (European): Safety of information technology equipment including business
equipment.
• IEC 950 (International): Safety of information technology equipment including
business equipment.
In addition, this equipment has been designed to meet the following:
• UL 1950 - USA (USA): Safety of information technology equipment including business
equipment.
2.2. EMC Standards
This equipment complies with following EMC standards:
Standard Area Title
EN 55022 European Emission Standard
EN 61000-3-2 European Electromagnetic Compatibility (EMC) Part 3 (Limits);
Section2; limits for harmonic current emissions
(equipment input current <16A per phase)
EN 61000-3-3 European European Electromagnetic Compatibility (EMC) Part 3
(Limits), Section 3; limitation of voltage fluctuation and
flicker in low-voltage supply systems for equipment with
rated current of 16 A.
EN 61000-4-3 European European Electromagnetic Compatibility (EMC) Part 4
(Limits), Section 3; Testing and measurement techniques
- Radiated, radio-Frequency, electromagnetic field
immunity test.
EN 61000-4-4 European European Electromagnetic Compatibility (EMC) Part 4
(Limits), Section 4; Testing and measurement techniques
- Electrical fast transient/burst immunity test.
EN 61000-4-5 European European Electromagnetic Compatibility (EMC) Part 4
(Limits), Section 5; Testing and measurement techniques
- Surge immunity test.
EN 61000-4-6 European European Electromagnetic Compatibility (EMC) Part 4
(Limits); Section 6 ; Testing and measurement techniques
- Immunity to conducted disturbances, induced by radio-
frequency fields.
HARDWARE TECHNICAL REFERENCE MANUAL XT3 Server 12.05
2. Safety and Compliance 3