EVS XT-3 - Bnc Connectors

Video and Codecs
The codecs modules allow connections for recording and playback of video material.
Each connector on a codec module is connected to the corresponding J connector on the
COD A or COD B module of a V3X board.
See section "V3X Video and Reference Boards" on page 85 for more details on each
connector specific usage according to the different configurations.
The video and codecs connector layouts described in this section are available according
to your configuration.
2-Channel Version
4-Channel Version
Digital Audio
The audio inputs and outputs are available on BNC or on multi-pin (DA-15) connectors for
audio signal inputs and outputs in digital format.
See section "Audio Connections" on page 62 for more details on the DA-15 connectors
pinout according to the different configurations.
The following digital audio connectors layouts are available according to your
configuration:
BNC Connectors
16BNC connectors (8in and 8out)
HARDWARE TECHNICAL REFERENCE MANUAL XT3 Server 12.05
5. Hardware Installation and Cabling 55