EVS XT-3 User Manual

SAS-HDX
The SAS-HDX connector allows the connection to the external disk array SAS-HDX if it
is installed.
Power Supplies
The server power supply is made of two hot-swappable units. Both of these units are
connected to allow automatic power switching to the second power supply should the first
one fail.
5.2.4. 4U Rear Panel Layout (USB Chassis)
Rear Panel Areas
The following drawing represents an example of a 4U rear panel available on an XT3
server.
The various areas of the rear panel are highlighted in the drawing and their respective
variants are listed in the following table along with a short description of the related
connectors.
58 5. Hardware Installation and Cabling
EVS Broadcast Equipment SA Issue 12.05.C- November 2014

EVS XT-3 Specifications

General

Brand	EVS
Model	XT-3
Category	Server
Language	English