EVS XT4K - Audio Connections; Audio Channels

5.4. Audio Connections
5.4.1. Audio Channels
The XT4K server manages up to 192audio channels, depending on the chosen variant and
the installed hardware.
The embedded audio modules and codecs can be used as input or output channels for
embedded, digital (AES/EBU) signals.
Depending on the server chassis or configuration, you can find the following audio
connectors on the rear panel:
• Digital audio:
◦ DA-15 connectors: 16 inputs (8 pairs) and 16 outputs (8 pairs) (110 Ohm
balanced).
◦ BNC connectors: 8 inputs and 8 outputs on an XT4K server (75 Ohm unbalanced).
• MADI Digital audio:
◦ BNC connectors: 2 inputs and 2 outputs (75 Ohm unbalanced).
• Audio monitoring :
◦ XLR connectors: 4 analog mono outputs (600 Ohm drive capable).
• Breakout cables with XLR connectors can be adapted on DA-15 connectors.
See also section "Audio Specifications" on page 11 for full information on the available
audio hardware configurations.
The connectors are illustrated along with their respective pinouts in the following topics.
TECHNICAL REFERENCE MANUAL XT4K Server 15.2
5. Hardware Installation and Cabling 39