EWM drive 4 Basic - Technical Data; Drive 4 Basic

Technical data
drive 4 Basic
099-005401-EW501
17.06.2014
51
8 Technical data
NOTE
Performance specifications and guarantee only in connection with original spare and
replacement parts!
8.1 drive 4 Basic
Supply voltage
42 VAC
Maximum welding current at 60% DC
550 A
Maximum welding current at 100% DC
430 A
Wire feed speed
0.5 m/min–24 m/min
19.68 ipm–944.88 ipm
Factory-installed roller equipment
1.2 mm (for steel wire)
Drive
4-roll (37 mm)
Wire spool diameter
Standardized wire spools up to 300 mm
Welding torch connection
Euro torch connector
Protection classification
IP 23
Ambient temperature
-25 °C to +40 °C
Dimensions L x W x H
660 mm x 280 mm x 380 mm
Weight
14 kg
EMC class
A
Constructed to standard
IEC 60974-1, -5, -10/