Setting Up Your Unit
FTB-2/FTB-2 Pro and FTB-4 Pro 93
Recalibrating the Touchscreen
4. Using the stylus (or any blunt pointing device), simply press the center
of the different targets that appear on the screen. Keep pressing until
the application displays OK to indicate that the new parameters have
been taken into account.
Note: If you want to stop the calibration process, stop pressing the screen. The
application will close automatically after a few seconds and you will return
to the System Settings window.
5. When you see the message indicating that the calibration is complete,
tap OK to return to the System Settings window.
New parameters taken into account
Percentage of completion
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
