Managing Data
FTB-2/FTB-2 Pro and FTB-4 Pro 171
Transferring Data Using the Bluetooth Technology
Transferring Data Using the Bluetooth
Technology
If you have purchased the RF (Wi-Fi and Bluetooth
®
) option, you can
transfer data between your unit and a computer (or another device such as
a smartphone) using the Bluetooth
®
technology. In all cases, you must
ensure that the computer or the device is compatible with the
Bluetooth
®
technology and configured properly.
Note: Some devices that are compatible with the Bluetooth
®
technology only
allow data transfer between devices of the same manufacturer. In this
case, you will need to use another type of device or a standard computer to
transfer data from your unit.
Your unit must be located within a 10-meter area from your computer
(limitation of the Bluetooth
®
Class 2 devices).
Since transfer speed is limited for larger files (more than 1 GB), if you need
to transfer such files, you may want to use a USB key, or connect to a Wi-Fi
or an Ethernet network.
The procedure presented hereafter explains how to transfer data from your
unit to a computer.
Note: If you transfer files from a computer to your unit, they will be sent
automatically to the This PC\Documents\Bluetooth Folder on your unit.
IMPORTANT
Depending on the operating system that your computer is running
(or on the smartphone that you are using), it is possible that only
data transfer secured with a passkey be allowed.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
