Getting Started with Your Unit
FTB-2/FTB-2 Pro and FTB-4 Pro 35
Positioning Your Unit
Positioning Your Unit
You can position your unit either vertically (with the screen facing you), or
at an angle, using the support on the back panel. With the FTB-2 and FTB-2
Pro models, you can also hold your unit with the provided hand strap.
Note: The stand ensures optimum stability to the unit during your tests.
To position the unit using the support:
Pull out the support.
CAUTION
With the FTB-4 Pro, always ensure that the support is fully extended
when you use it. This will ensure maximum stability and prevent
injuries as well as damage to the test components.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
