EXFO FTB-4 Pro - Working with FTB and Ftbx Modules

Introducing the FTB-2/FTB-2 Pro and FTB-4 Pro
10 FTB-2/FTB-2 Pro and FTB-4 Pro
Working With FTB and FTBx Modules
Working With FTB and FTBx Modules
You can insert FTBx modules, FTB modules, or a combination of both in
your unit.
The type of modules (FTBx or FTB) is indicated on the front panel of the
module, on the identification sticker affixed to its side, or on both.
However, since the two types of modules have very different heights and
lengths, you can also identify them just at a glance.
On the images below, the FTBx module is shown in dark gray.
CAUTION
Your unit is compatible with some of the FTBx modules and some of
the FTB modules. For a list of supported modules, refer to your
unit’s technical specifications. To avoid damaging your unit, use it
only with modules approved by EXFO.
Side
FTBx module
FTB module
Identification sticker
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com