Getting Started with Your Unit
34 FTB-2/FTB-2 Pro and FTB-4 Pro
Grounding Your Unit
To ground your unit:
1. Position the unit so that you can see its left panel.
2. Place the U-shaped terminal under the grounding stud’s screw head.
3. Turn the grounding stud clockwise to screw it tight.
4. Ground the other end of the wire as per your local regulation.
Your unit is now grounded properly.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
