Troubleshooting
FTB-2/FTB-2 Pro and FTB-4 Pro 339
Restoring Your Unit to Normal Operation
10. Locate the USB key, and then double-tap its identifier to access the
contents.
11. Select the desired folder.
12. Enter a file name, and then tap Save.
13. Tap Start.
Note: The time required to create the image varies with the configuration of your
unit.
14. When the operation is complete and the application prompts you, tap
OK.
15. Disconnect the USB key.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
