Getting Started with Your Unit
FTB-2/FTB-2 Pro and FTB-4 Pro 37
Installing the Carry Handle
3. Place the handle flat on the top of your unit as shown below.
4. Slide each end of the handle under the corresponding metal rod.
5. Pull on the straps until the base of each D-shaped metal ring rests on
the corresponding rod.
6. Slide the straps through the D-shaped rings.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
