Getting Started with Your Unit
52 FTB-2/FTB-2 Pro and FTB-4 Pro
Inserting and Removing Test Modules
To remove a module from the unit:
1. If you want to remove an FTB module, turn off your unit (shut down,
not hibernate or sleep).
OR
If you want to remove an FTBx module, from ToolBox X, tap the
button.
Note: The button is not available for the FTB modules because they do not
support ejection.
2. Position the unit so that its right panel is facing you.
CAUTION
Once you have pressed the button, wait until the status of the
module switches to “Safe to Remove” in ToolBox X.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
