SCPI Command Reference (FTBx-9150/FTBx-9160 Only)
Optical Switch 97
Product-Specific Commands—Description
:ROUTe[1..n]:SCAN:ADJust
Description This command makes the switch mechanism
return to a reference position before aligning to
the current position.
This command is an event and has no associated
*RST condition or query form.
Syntax :ROUTe[1..n]:SCAN:ADJust
Parameter(s) None
Example(s) ROUT:SCAN:ADJ
See Also ROUTe[1..n]:SCAN:ADJust:AUTO
ROUTe[1..n]:SCAN:ADJust:AUTO?
To Next Page
Loading...