Operating the Optical Switch
Optical Switch 53
Selecting Configurations with the 2 x 2 Model
Selecting Configurations with the 2 x 2 Model
Note: This feature is not necessarily available on all platforms.
The 2 x 2 optical switch model offers two configurations:
Insert mode: Input 1 will be linked to output 1, and input 2 will be
linked to output 2.
Bypass mode: Input 1 will be linked to output 2 and vice-versa.
Note: See Basic Switching Principles on page 12 for details.
To select a configuration with the 2 x 2 optical switch model:
In the Switch panel, use the two buttons to select which configuration you
want to use.
Note: For the 2 x 2 model, the Continuity function is not available.
To Next Page
Loading...