SCPI Command Reference (FTBx-9150/FTBx-9160 Only)
90 Optical Switch
Product-Specific Commands—Description
:ROUTe[1..n]:OPEN
Description This command makes the switch change from
the reset position (no optical continuity) to the
channel position in effect when the switch was
turned off.
*RST has no effect on this command.
Syntax :ROUTe[1..n]:OPEN
Parameter(s) None
Example(s) ROUT:OPEN
Notes For all switches except: 1x2, 2x2, and 2x4.
See Also ROUTe[1..n]:OPEN
ROUTe[1..n]:OPEN:STATe?
To Next Page
Loading...