30
G-10
R
SERVICE PROGRAMMING
Dose programming
Continuous Dispensing button
Hot water button
This menu is used to enable/disable coffee-dose programming (see fig. 16).
When disabled, users are not able to modify the doses (as described in the user
manual). This mode is intended to prevent users setting inappropriate doses.
To enable coffee-dose programming, press the 1 Short Espresso button .
To disable coffee-dose programming, press the 1 Long Espresso button .
To accept the setting selected and move on to the next menu, press the Continuous
Dispensing button
.
Dose programming
Enabled/Disabled
Fig. 16
This menu is used to enable the Continuous Dispensing button's continuous
dispensing function (see fig. 17).
To enable it, press the 1 Short Espresso button .
To disable it, press the 1 Long Espresso button .
To accept the setting selected and move on to the next menu, press the Continuous
Dispensing button
.
Continuous Dispens-
ing button
Enabled/Disabled
Fig. 17
If the infusion hot-water spout is controlled by a manual tap:
The function can be disabled by pressing the 1 Long Espresso button .
If the infusion hot-water spout is controlled by an electrovalve (the machine has a
water spout but no tap):
The function can be enabled by pressing the 1 Short Espresso button .
To accept the setting selected and move on to the next menu, press the Continuous
Dispensing button
.
Hot water button
Yes/No
Fig. 18
To Next Page
Loading...
Need help?
General
