PQ3470-en-GB_V1.9 10/15
20
4.5.16 Set Time and Date
1. In the Setup Mode, use the up and down arrow keys to scroll to the YEAR, MONTH, DATE,
HOUR, MINUTE, and SECOND fields.
2. Press SHIFT key when the desired field is selected, the display "SHIFT1" will switch ON
3. Use the ▲ or ▼ keys to change the date or time value
4. Press SHIFT again to return to Setup Mode editing or press EXIT to leave the Setup mode.
4.5.17 Exit the Setup Mode
When all of the programming has been completed, press the EXIT key to return to the
measurement mode of operation.
To Next Page
Loading...
