Extreme Networks ExtremeSwitching 210-12t-GE2 User Manual

Figure 30: Attaching the Rack-Mounting Brackets
1 = Rack-mounting brackets (2) 2 = M3x6mm flathead screws (8)
2 With the rack-mounting brackets attached, position the RPS-500p between the vertical rack rails of
the 19-inch rack as shown in Figure 31.
Figure 31: Fastening the RPS-500p to the Rack
1 = RPS-500p
3 = Mounting screws (4)
2 = Rails of 19-inch rack
3 Fasten the RPS-500p securely to the rack rails using four customer-supplied rack screws.
External Power Supplies
ExtremeSwitching 210 and 220 Series Switches: Hardware Installation Guide 33

Extreme Networks ExtremeSwitching 210-12t-GE2 Specifications

General

Brand	Extreme Networks
Model	ExtremeSwitching 210-12t-GE2
Category	Switch
Language	English