The contents of the KT-150173-01 extension arm are described in the following table.
Part number Box contents
KT-150173-01 One KT-150173-01 12 in. extension arm
Two hex-head M12 stainless-steel screws
Two hex-head M12 stainless-steel nuts
One URL card
Note
You must provide the required M6 hex-head screws and nuts for at surface
installation.
Part number Box contents
MBO-ART02
The MBO-ART02 wall
mount bracket is End of
Sale (EOS) as of January,
2023. It is replaced by the
MBO-ART03 bracket.
ART02 10 in. 2-axis articulating mounting bracket
Four concrete anchors with washers and nuts
Two stainless-steel M6 screws
One hex-head screw
One URL card
Part number Box contents
WS-MBO-POLE01
The WS-MBO-POLE01
bracket is End of Sale (EOS)
as of January, 2023.
One WS-MBO-POLE01 bracket
Four M3 screws with nuts and washers
One URL card
AP560h Overview AP560h purchase order information
ExtremeWireless™ AP560h Access Point 13
To Next Page
Loading...
