Extreme Networks ExtremeWireless AP560h - Installation Procedures; Verify the AP560 h Box Contents

Install the Access Point
Verify the AP560h Box Contents on page 15
Access Point Bracket Usage and Mounting Options on page 16
Install the Access Point on a Wall on page 17
Install the Access Point on a Pole on page 25
Secure the Access Point after Installation on page 34
Power or Pressure Washing Guidelines on page 35
About This Task
The access point is installed on a at surface such as a wall and to a pole using brackets
and accessories. Refer to the purchase order information to know more about picking
the right access point bundle for your installation needs.
Note
The access point cannot be installed directly on a wall or to a pole without the
mounting bracket.
When you receive the access point bundle, perform a visual inspection of the access
point, the bracket, and the accessories for any physical damage.
Contact Extreme Networks Support in case of any damage.
Before installing the access point:
Procedure
1. Verify the box contents.
2. Review the safety guidelines.
Verify the AP560h Box Contents
About This Task
The box contains the access point and a removable label for your documentation. There
is another label that mentions the minimum base rmware version that the product
needs to have.
ExtremeWireless™ AP560h Access Point 15