Extreme Networks ExtremeWireless AP560h - Page 36

• Use only commercially available ice-melt products.
Warning
Do not use cleaning agents, solvents, and ice-melt products that are
ammable, contain polycarbonate or rubber dissolving ingredients, uses
rened petrochemical materials, and any other materials that can damage a
concrete surface.
Note
Do not use the power washing equipment near power lines.
Note
Wear safety goggles with complete eye protection when using the power
washing equipment.
About This Task
You can pressure wash the access point and the surface around the access point to
remove dirt and debris.
Note
The best practice is to follow the pressure washing guidelines for longevity of
the access point parts.
Procedure
1. Use a prescribed pressure washing nozzle to wash the access point and the surface
around it.
2. Keep the pressure washing nozzle at least 24 in. away from the access point.
3.
Power or Pressure Washing Guidelines Install the Access Point
36 ExtremeWireless™ AP560h Access Point