Extron electronics ShareLink Pro 500 - Page 34

ShareLink Pro 500 • SIS Configuration and Control 27
X1@ = Color bit depth
0 = Auto mode (default) 1 = Force 8-bit
X1# = Output video format
0 = Auto (default) 1 = DVI RGB 4:4:4 Full
2 = HDMI RGB 4:4:4 Full 3 = HDMI RGB 4:4:4 Limited
4 = HDMI YUV 4:4:4 Limited 5 = HDMI YUV 4:2:2 Limited
6 = HDMI YUV 4:2:0 Limited
X1$ = HDCP status
0 = Not connected 1 = Not HDCP Encrypted
2 = HDCP Encrypted
X1% = HDCP authorized status
0 = HDCP authorize off 1 = HDCP authorize on (default)
X1^ = HDCP mode
0 = Follow input (default)
1 = Always encrypt
2 = Follow input with continuous DVI trials
3 = Always encrypt with continuous DVI trials
4 = Disable authentication
X1& = HDCP notification
0 = Black screen
1 = Green screen (default)
X1* = Video mute status
0 = Unmute (default)
1 = Mute video
2 = Mute sync
X1( = Audio mute status
0 = Unmute (default) 1 = mute
X2! = Input type
1 = HDMI 2 = Decoder (for all decoder streams)
3 = Airplay streams 4 = Uploaded image/video content
X2@ = Input aspect ratio setting
1 = Fill 2 = Follow (default)
X2# = Volume adjustment range
-100 to 0 = (default is -30 dB)
X2* = Executive mode
0 = Off (default)
1 = On
X3) = Unit name
Alpha-numeric up to 63 characters. No blanks, spaces, or special
characters except hyphen (-).
X3! = Default unit name
Alpha-numeric name. ShareLink-Pro-xx-xx-xx
(where xx-xx-xx is the last six digits of the unique MAC address).
X3@ = Firmware version (Ex: 1.00)
X3# = Firmware version and build version (Ex: 1.00.0010)
X3$ = Internal temperature (2 digits, °C)
X3% = Verbose response mode
0 = Clear (none) (default), 1 = Verbose mode,
2 = Tagged responses, 3 = Verbose + tagged responses
X3^ = Layout mode
1 = Layout group #1 (default) 2 = Layout group #2
3 = Layout group #3 4 = Layout group #4
5 = Layout group #5
X3& = Current layout number (1-15)
X3* = HDMI input mode
0 = Disabled 1 = Enabled (default)
X3( = Apple screen mirroring mode
0 = Disabled 1 = Enabled (default)
X39! = Device discovery proxy service
0 = Disabled (default) 1 = Enabled
X4) = HDMI controls setting
0 = Disabled 1 = Enabled (default)
X4! = Client app controls label
UTF-8 characters permitted, maximum of 16 characters
X40! = HDMI client app controls
0 = Hide 1 = Show (default)
X4@ = Access mode
1 = Full control 2 = Moderated 3 = Run-time (default)
X40@ = WebShare mode
0 = Disabled 1 = Enabled (default)
X4# = Run time access mode
1 = Full control 2 = Moderated
X40# = IP address visibility setting
0 = Disabled (default) 1 = Enabled
X4$ = Confirmation code mode
0 = None 1 = Fixed 2 = Random (default)
X4% = Login key code
Four digit value (default = 0000)