ShareLink Pro 500 • SIS Configuration and Control 44
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Network shares
Add a network share
EA{"service":"X10^",
"mountpoint":"X10&",
"username":"X10*",
"password":"X10(",
"options":"X11)",
"reconnect":"X11!",
"extron_share":"X11@"}
XNAS}
XnasA<parameters
& status in JSON
format>]
Add or mount a network share
Example:
XnasA{“username”:“user1”,
“password”:”****”,
“options”:”ro”, …}]
Unmount (remove) a share
EX*
X10&XNAS} XnasX*
X10&]
Unmount (remove) all shares
EX*0XNAS} XnasX*0]
View all mounted shares
EGXNAS} [list of shares in JSON format]]
Example:
[{“options”: “”, “username”: “”,
“password”: “”, “type”: “nfs”,
“service”: “10.0.0.0://home/bob/Videos”,
“mountpoint”: “10.0.0.0”, “extron_share”:
false, “status”: “unavailable”, “recon-
nect”: true}, {…}] ]
(Verbose mode 2/3):
XnasG[list of shares in JSON format]]
IP control port commands
(IP setup)
NOTE: Setting any values with the CISG command will change DHCP from on to off.
Set IP address, subnet
mask, and gateway address
E1*X11*/X11(*X12)
CISG}
Cisg
•
1*X11*/X11(*X12)]
View all IP Settings
E1CISG} X11*/X11(*X12)]
KEY:
X10^ = Service (network path of
server)
CIFS: “\\\\myServer\\myShare\\myDir”
NFS: “myServer:/myDir”
X10& = Mountpoint
X10*
= Username
X10( = Password
X11)
= Options
X11! = Boolean for reconnect
X11@ = Boolean for extron_share
NOTE: The boolean value should be "true" or "false." It does not require quotes and must be all lowercase.
X11*
= IP address
Format nnn.nnn.nnn.nnn
Default = 192.168.254.254
Leading zeros in each of the four octets are optional in setting values, and are
suppressed in returned values.
X11( = Subnet mask in CISG
commands
Prefix representing subnet mask bits (subnet mask value in CISG commands).
Default = /24, which represents the default subnet mask, 255.255.255.0.
X12) = Gateway IP address
Format nnn.nnn.nnn.nnn
Default = 0.0.0.0
To Next Page
Loading...
